High Quality Medical Casting Tape
Product introduction
It's a kind of new type orthopedic external fixation material which has better performance than plaster bandage always used for the external fixation of fractures and orthopedics ,an ideal substitute of traditional plaster bandage.
Product information
Product features
A. Comfortable safety
Patients do not have a uncomfortable feeling that the affected part becomes tight and itchy like using plaster
bandage , benefiting from slight contractility using The cast .
B. Fast solidifying
The cast and splint begins to harden in 2 to 3 minutes after wetted, completely hardened within 15 minutes, ,thus preventing the fracture shifting again .
C. Excellent permeability
This cast has excellent air permeability because of unique mesh weaving technology solving the problem that local tube type fixed airtight can cause skin moisture , itching and so on.
D. Good X-ray permissibility
Good Permeability of radioactive, clear X ray film,it could ensure that the doctor accurately judges the healing of would limb.
E. Light quality and High strength
Polyurethane material has soft chain segment making its cohesion force increased and hardness chain segment making its hardness enhanced . Testing after fiberglass casting tape solidified , the hardness is 20 times of traditional plaster bandage, and the weight is 1/5 , the thickness is 1/4 .
This feature effectively reduce the risk and possibility of part affected that injured by external force again, and the characteristics of light weight also making patients to load more lightly, being good for local blood circulation,
accelerating healing.
F. Waterproof
The effect that the part injured is fixed by The cast and splint will not be affected , even if soaking it in the water after solidified completely. So patients can take a shower and medicated bath safely.
G. Excellent Molding
It is conducive to better be fixed and shaped for Good molding , high bending and tensile strength ,
H. Operated easily and flexibly
The product is used only a small amount of water at room temperature, fixed in a short time, completely solidified within 10 minutes.And also fixed directly without water if there is a wound on the surface or the operating
time is too long ,then spraying water on the surface to activate its hardening.
I. Health and beauty
Neat edge,beautiful appearance,no burr,no dust.
Scope of application
External fixation for fracture or orthopedic,mold,prosthetic aids product, local burn protective
The cast Instruction for use
-
Choose proper specification according to need.
-
Winding cotton stuff on the needed part as mat.
-
Wear latex gloves.
-
Open the package one by one and take it out.Saturate it in water for 2-3 seconds and press it 2-3 times. Press out the water.
-
Make a spiral wrapping up with 3-4 layers on non-supporting part and 4- 5 layer on support part, Do not apply tightly.
-
Shape it with wetted gloves ,functional strength achieved in 20 minutes.
Attention
-
Must wear latex gloves when operating in case of kissing your hands.
-
No opening 2cps casting at the same time .
-
Must be used in 3-5 minutes after opening the bags ,in case of hardening.
-
Storage in cool and dry place ,and don't damage the package in case of hardening.Hardening time speed is proportional to the temperature and how many water used.
Send Email
QQ
Whatsapp